TRD 2.5" Supercharged Exhaust Header
header is a 4 2 1 design which promotes a healthy torque power curve.
The only complaints
that I had, were those ruff edges where the gasket seal is to be made, and the fact that the header was
equiped with american bolts when this is a Japanese Car! I mean come on TRD!
||In this picture, you can see where the american EGR valve screws
in. *only other picture I have*|
Also, the O2 Sensor comes real close to touching the chassis. But
under power, the engine rocks forward moving the sensor away from the chassis.
So it is OK.
b a c k