Bill, is this what you had in mind? I think this is a 1985-86 front strut brace. All we gotta do is just add some material at each end and bolt it up
(http://www.marcmedina.com/images/stb1.JPG)
Something like that, but instead of cutting the ends and only having 1 bolthole, weld a piece of 1/16" plate to the ends and drill new holes to fit properly
Quote from: BigMike on February 09, 2011, 07:03:36 PM
All we gotta do is just add some material at each end and bolt it up
:thumbs: We could even utilize 3 studs on each side, but 2 should suffice.