Started by BigMike, January 25, 2010, 10:02:54 PM
0 Members and 3 Guests are viewing this topic.
Quote from: kdogae86 on March 30, 2010, 08:59:01 PMexcept for the 5 gallon bucket vent modhahaha
Quote from: BigMike on March 30, 2010, 07:50:20 AMCheck this one out...
QuoteWhen our overheating issue returned at the beginning of day one we considered our options. We decided to suffer through the day refilling the cooling system as needed implement a fix in the evening. After watching Paul do a 7 hour head gasket job only to still have overheating issues, we decided to it would be better to find a more effective way to refill and bleed the cooling system than tear the engine open. I'd seen Team Eyesore's weed sprayer with a pressure fitting on their cooling system and suggested we copy them. Randal took it a step further and mounted the bottle in the cab so we could refill on the track. The pressure bottle feeds through a ball valve and into the heater circuit on the engine. We would pump the bottle a few times on the front straight and if we thought the engine was getting warm, we opened the valve for a few seconds. Not really a solution, but certainly an effective temporary fix. We didn't overheat again during the race!
Quote from: kdogae86 on April 18, 2010, 11:28:27 PMive read on forums where people are afraid to get rid of any wiring cause you never know when youll kill a common ground.dont think well have that problem
Quote3.13: Nerf Bars Not Allowed: Added structural elements that extend past the original bodywork line are not allowed. In other words, no nerf bars, wheel-protection cages, or crash bars. (Worried about your car being damaged? Here's an idea--don't hit anyone.)
Page created in 0.177 seconds with 24 queries.