Started by BigMike, May 27, 2010, 10:25:00 AM
0 Members and 4 Guests are viewing this topic.
Quote from: Sirdeuce on February 10, 2014, 09:41:43 AMA problem with the short shift mod. When you move the shift cable end up the stick you also increase the angle of the cable. The cable sheath is just plastic and will break at the mounting boss. You need to move the cable mount up to get a lesser angle. Driving with a uncooperative shifter is a real pain!
Quote from: Sirdeuce on February 11, 2014, 06:40:49 PMNo, I'm talking about the other end, the shift handle. When you pull back for 2,4,6 gears the cable angle increases to a point where it stresses the cable sheath. Moving the shift cable end high on the shifter lever causes this little bit of stress.
Page created in 0.119 seconds with 24 queries.