Started by BigMike, January 03, 2013, 09:02:29 AM
0 Members and 1 Guest are viewing this topic.
Quote from: BigMike on January 04, 2013, 06:09:10 PMNo discouragement taken, but I do need to be more humble, I always get carried away thinking about finally getting to a track!The tire requirements for the Enthusiasts class is DOT, no lower than 140 tread wear and the drive tires may be no wider than 285mm (for 2WD) or 255mm wide for AWD.Was the CR available for the AP2? If so then its likely he had more torque which would be a huge aid. Also some engine mods are allowed, mainly external, so its highly likely he is putting down more power than stock.
Page created in 0.095 seconds with 23 queries.